Products

BDL

Specialized Polycarbonate System

BDL is the ideal solution for the creation of skylights or transparent roofs, both flat and curved. The system, consisting of a polycarbonate multiwall panel in extruded polycarbonate, provides good thermal insulation and excellent optical and mechanical properties. The union between the panels is obtained in a simple and effective manner through the use of specific polycarbonate snap-on profiles (or aluminium ones if the structural loading of the project requires). The particular click fixing system doesn’t foreseen holes in the polycarbonate panel, thus allowing the creation of roofs of long lengths, facilitating easy installation of the product and a stable sealing against water infiltration.

Technical Data - Download

Benefits

Quick and easy to assemble
High thermal insulation
Excellent impact resistance
Good light transmission
Good fire performance
Certified quality guarantee
UV protection on both sides

Description Technical Data Accessories

UV PROTECTION

UV protection on both sides

Sheets protected from the effects of UV rays on both sides. Particularly suitable for applications where they may be exposed to direct and/or indirect solar radiation on both sides. This treatment also eliminates installation errors, while cutting is optimized since XL the sheeting is protected whichever side faces up.

CUSTOMIZATION

ANTIGLARE

ANTI-REFLECTIVE treatment

The special ANTIGLARE treatment, on the UV protected side, significantly reduces the glare effect due to the reflection of the light rays. It also creates a pleasant diffusion of light inside the building.

XL PLUS

Extra UV protection on both sides

Sheets with increased, extra strong protection from UV rays on both sides. Ideal for use in applications marked by particularly harsh environmental conditions.

PANEL

BDL 4W 10 mm BDL 7W 16 mm BDL 7W 25 mm

BDL 4W 10 mm

The system BDL 4W 10 mm is ideal for the construction of flat and curved roofs. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles, and other completion accessories). The 600 mm width allows easy handling of the panel during the stages of installation, while the 4 walls inner structure combines lightness and transparency The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time.

CUSTOMIZATION

ANTIGLARE

XLPLUS

UV PROTECTION

BDL 7W 16 mm

The system BDL 7W 16 mm is ideal for the construction of flat and curved roofs. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles, and other completion accessories). The 600 mm width allows easy handling of the panel during the stages of installation, while the 7 walls inner structure combines lightness and transparency. The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time.

CUSTOMIZATION

ANTIGLARE

XLPLUS

UV PROTECTION

BDL 7W 25 mm

The system BDL 7W 25 mm is ideal for the construction of flat and curved roofs as well as translucent vertical walls. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles). The 600 mm width allows easy handling of the panel during the stages of installation, while the 7 walls inner structure and the 25 mm thickness guarantee good thermal insulation and load resistance. The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time. The possibility of use for both roofs and walls make it an extremely versatile system and suitable for the most innovative design solutions.

CUSTOMIZATION

ANTIGLARE

XLPLUS

UV PROTECTION

PANEL

BDL 4W 10 mm BDL 7W 16 mm BDL 7W 25 mm

ACCESSORY [SCHEME]	DIM (mm)	TECHNICAL DESIGN
Polycarbonate snap-on profile (Cod. J443)	12000 mm
Aluminium snap-on profile (Cod. M9RA)	6000 mm
Stainless steel hook for J443 profile (Cod. M9S2)	---
Aluminium hook for M9RA profile (Cod. M9VH)	---
Aluminium upper head profile (Cod. M9S9)	6000 mm
Aluminium lower head profile (Cod. M9T0)	6000 mm
Aluminium cap profile (Cod. M9T1)	6000 mm
EPDM thermal-break seal (Cod. M9T5)	---
1 mm EPDM gasket (Cod. M9S3)	---
3 mm EPDM gasket (Cod. M9S5)	---
Aluminium strengthening profile (Cod. M9T2)	6000 mm
Aluminium fixed sill profile (Cod. M9R6)	6500 mm
Aluminium revolving sill profile (Cod. M9R7)	6500 mm
10 mm aluminium panel stop (Cod. M9R4)	5700 mm
Aluminium revolving sill profile (40 mm) (Cod. M9R8)	6500 mm
EPDM gasket (Cod. M926)	---
Nylon end cap (Cod. M9TA)	---
PE spacer (Cod. M993)	40x45 mm
PE spacer (Cod. M9G9)	30x40 mm
Aluminium adhesive tape (50 m roll) (Cod. M965)	H = 38 mm
Aluminium adhesive breather tape (50 m roll) (Cod. M968)	H = 38 mm

ACCESSORY [SCHEME]	DIM (mm)	TECHNICAL DESIGN
Polycarbonate snap-on profile (Cod. J443)	12000 mm
Aluminium snap-on profile (Cod. M9RA)	6000 mm
Stainless steel hook for J443 profile (Cod. M9U7)	---
Aluminium hook for M9RA profile (Cod. M9VH)	---
Aluminium upper head profile (Cod. M9S9)	6000 mm
Aluminium lower head profile (Cod. M9T0)	6000 mm
Aluminium cap profile (Cod. M9T1)	6000 mm
EPDM thermal-break seal (Cod. M9T5)	---
1 mm EPDM gasket (Cod. M9S3)	---
3 mm EPDM gasket (Cod. M9S5)	---
Aluminium strengthening profile (Cod. M9T2)	6000 mm
Aluminium fixed sill profile (Cod. M9R6)	6500 mm
Aluminium revolving sill profile (Cod. M9R7)	6500 mm
16 mm aluminium panel stop (Cod. M9R5)	5700 mm
Aluminium revolving sill profile (46 mm) (Cod. M9T6)	6500 mm
EPDM gasket (Cod. M926)	---
Nylon end cap (Cod. M9TA)	---
PE spacer (Cod. M993)	40x45 mm
PE spacer (Cod. M9G9)	30x40 mm
Aluminium adhesive tape (50 m roll) (Cod. M965)	H = 38 mm
Aluminium adhesive breather tape (50 m roll) (Cod. M968)	H = 38 mm

ACCESSORY [SCHEME]	DIM (mm)	TECHNICAL DESIGN
Polycarbonate snap-on profile (Cod. J443)	12000 mm
Aluminium snap-on profile (Cod. M9RA)	6000 mm
Stainless steel hook for J443 profile (Cod. M9X3)	---
Aluminium hook for M9RA profile (Cod. M9VH)	---
End aluminium profile (Cod. M9VE)	6500 mm
End aluminium profile (Cod. M9VF)	6500 mm
Spacer aluminium profile (Cod. M9VG)	6500 mm
EPDM gasket (Cod. M926)	---
Aluminium U profile for 25 mm (Cod. M9RC)	6500 mm
Aluminium strengthening profile (Cod. M9T2)	6000 mm
Nylon end cap (Cod. M9TA)	---
PE spacer (Cod. M993)	40x45 mm
PE spacer (Cod. M9G9)	30x40 mm
Aluminium adhesive tape (50 m roll) (Cod. M957)	H = 50 mm
Aluminium adhesive breather tape (50 m roll) (Cod. M969)	H = 50 mm

Other Products

The system for ceiling and walls Click 16 is ideal to make flat roofs and those of small surfaces such as garages, canopies, portals and greenhouses. It is made by polycarbonate extruded sheets with a 4 – wall structure.

The specialized polycarbonate system Easyroof PA is the best solution for natural lighting on isolated polycarbonate sheets.

Modulit is a modular sheets system of extruded polycarbonate, ideal for the construction of translucent vertical and/or sloping walls.